









- Stock: In Stock
- Model: RDDLZ-AVS-1P10K
- Weight: 1.00
- SKU: RDDLZ-AVS-1P10K
Available Options
Cheap and high quality 10 kVA Single Phase AC Automatic Voltage Stabilizer for Home used with input voltage range 95-125V/ 190-250V, 110V±3%/ 220V±3% output voltage, easy to install and operate, protects the equipment or electronic appliances against voltage fluctuation.
Specifications
Product Name | Automatic Voltage Stabilizer | ||||
Model Number | RDDLZSVC-10000VA | ||||
Technology | Relay Control System+Programmed control computerized+control algorithm relay"Cross zero" | ||||
Capacity | 10 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power) | ||||
Phase | Single Phase | ||||
Input Voltage Range | ±15% tolerance of output voltage | ||||
Output Voltage* | 220V±3%/ 230V±3%/ 240V±3%/ 110V±3% (Optional) | ||||
Adjust Time | <1sec. (Against 10% input voltage deviation) | ||||
Frequency | 50Hz/60Hz | ||||
Current Type | AC | ||||
Protection Over Voltage | <250±2V | ||||
Protection Lack Voltage | <185±2V | ||||
Ambient Temperature | -10°C~+40°C | ||||
Insulation Resistance | ≥5MΩ | ||||
Temperature Protection | 110℃±10℃ | ||||
Relative Humidity | <90% | ||||
Wave Form Distortion | No additional waveform distortion | ||||
Efficiency | >95% | ||||
Display | LED | ||||
Protection Grade | IP20 | ||||
Dielectric Strength | 1500V/min | ||||
Certification | CE, RoHS | ||||
Warranty Period | 12 months | ||||
Weight | 28 Kg/ 70 Kg | ||||
Size | LxWxH=580x300x270mm | ||||
Note: The provided 10 kVA voltage stabilizer is 1-phase (L, N, G) by Europe standard. And we can customize the split phase (L1, L2 + G) like USA standard ("G" can only be grounded), just confirm with us by email after ordering. |
Details
Tips: Safety device of the voltage stabilizer
The voltage stabilizer below 3 kVA uses a fuse for overload or short circuit protection, and the AC voltage stabilizer above 5 kVA uses a small circuit breaker or small air switch for overload or short circuit protection. When the voltage stabilizer is working, if fuse is blown or the automatic air circuit breaker trips, it should be shut down to check the load and the voltage stabilizer.
Visit blog post Safety Tips for Using Voltage Stabilizer.