Buy a 15W 12V/24V 4500rpm DC vibrating electric motor with a speed controller online. It is an adjustable brushless vibration motor that provides a force 5 kg, long service life, accurate digital display and simple speed regulation.

Features

• 15W 12V/24V DC brushless vibrating electric motor with a variable speed controller achieves stable operation and can adjust the speed of rotation.
• High efficiency and energy saving, saving 40-60% of electricity compared to ordinary motors. Long service life, 5 times that of ordinary motors.
• Small industrial DC vibration motor provides accurate and fast regulator positioning and analog output.
• It is resistant to deformation and oxidation and can withstand long-term high-speed operation.
• Special voltage and speed can be customized, please contact us.

Specifications

Notes

1. +/- 20% voltage tolerance.
2. Max/Minimum speed range that can be achieved via potentiometer: 1000-7200rpm.

Dimension (Unit: mm)

Appearance Contrast Chart

Applications

RDDLZ 15W 12V/24V 4500rpm micro DC brushless vibration electric motor is widely used in mining, metallurgy, coal, electric power, construction, chemical industry, medical care, casting, food, powder spraying equipment, powder sieving, food machinery, etc. 

Tips: How to deal with the noise of the micro-vibration motor?

1. When changing the pole and rewinding, the fit of the groove is not suitable
   If this is the case, all we have to do is verify the stator and fit the rotor slots.
2. Friction of the rotor
   Rotor abrasion will also cause noise in vibration electric motors. The most important thing is to rub against insulating paper or slot wedges. What we have to do is cut insulation paper or repair slot wedges, which can avoid noise. of.
3. The bearing is worn or bearing is broken
   If it is faulty, repair or replace it in time.
4. Looseness of stator and rotor cores
   The first thing we need to do is to check and eliminate the cause of the vibration, and then carry out the core treatment, to fundamentally prevent the occurrence of loosening again.
5. Three-phase voltage imbalance
   What needs to be done is to measure the power supply voltage, and at the same time, it is necessary to check why this imbalance occurs.
6. Stator winding is wrongly connected
   It will also cause noise in micro-miniature vibration motors. You need to adjust the wiring diagram and then connect it according to the correct method. In addition, a fault in the winding, such as a short circuit, will also cause noise. Open the circuit. The part is heated, and then the broken part is repaired with the wire of the same specification and then painted.

Therefore, if there is noise in a small vibration motor, you can use these methods to deal with it, to ensure better use.