Nema 23 Stepper Motor, 1A, 1.8 Degree, 2 Phase 6 Wires

0 reviews • Write a review

from

$63.31

Ex Tax: $63.31

Stock: In Stock
Model: RDDLZ-STEP-2412301
Weight: 1.00
SKU: RDDLZ-STEP-2412301

Available Options

Short Description

Input Pulse Voltage

Matched Drive

Qty

Add to Cart

Buy Now Question?

Add to Wish List Compare this Product

Shipping & Returns

Create unlimited custom product blocks and display them in accordions or tabs or open blocks. Each block can be assigned to all products at once or specific products according to advanced criteria.

Additional Product Info

Create unlimited custom product blocks and display them in accordions or tabs or open blocks. Each block can be assigned to all products at once or specific products according to advanced criteria.

Nema 23 Stepper motor, 1A, 2 phase 6 leads, 1.8 degree, manufacturer direct sale.

Specification

Electrical Specification	Model	RDDLZ57STH56-1006
	Matched Driver Model	RDDLZDSP57(Click it to see more info)
	Step Angle	1.8°
	Holding Torque	0.9Nm
	Rated Current/phase	1A
	Phase Resistance	7.4Ω
	Inductance	10mH
	Rotor Inertia	280g-cm2
Physical Specification	Frame Size	57 x 57mm
	Length	56mm
	Shaft Diameter	Φ6.35mm
	Shaft Length	19mm
	Motor Leads	6
	Weight	0.68kg
Technical Parameters	Step Angle Accuracy	±5% (full step, no load)
	Resistance Accuracy	±10%
	Inductance Accuracy	±20%
	Temperature Rise	80℃ Max. (rated current, 2 phase on)
	Ambient Temperature	-20℃~+50℃
	Insulation Resistance	100MΩ Min. 500VDC
	Dielectric Strength	500V AC for one minute
	Shaft Radial Play	0.02Max. 450g
	Shaft Axial Play	0.08Max. 450g
Quality Assurance	Warranty Period	12 months
Quality Assurance	Certificate	CE, ROHs, ISO/SGS9001

Dimensions: (Unit=mm)

L Max=56mm

Wiring Diagram

Tips: Reasons for out of step of stepper motor

The working torque of the stepper motor is not enough and there is not enough ability to drive load.
The acceleration and deceleration process for starting and stopping of stepper motor is not sufficient. The stepper motor runs out of steps during acceleration and deceleration process.
Power of the stepper motor is not enough, thus the input power of stepper motor is not enough, leading to out of step of the motor.
Drive voltage of the stepper motor is not enough or the drive current is too low.
Driver or controller receives the signal interference.
Load capacity of motor is reduced due to the system resonance of the stepper motor, thus the step out of the motor is caused.
Stepper motor driver is not matched with the signal of controller.
The gap or the back-and-forth clearance error of synchronizing gear or reducer is not compensated through programming or the compensation value is not correct.
There is something wrong with the control programming.

Builder in Product TAB

NEW! Since Journal 3.2, the much improved T.A.B (Tabs Accordion Blocks) system supports the page builder inside the tab content. Unlimited Blocks, Tabs or Accordions with any HTML content or the builder interface (supporting custom rows/columns/modules) can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules. Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.