High Precision Digital Pressure Switch, Rc1/ 8

0 reviews • Write a review

from

$104.92

Ex Tax: $104.92

Stock: In Stock
Model: RDDLZ-DPS-30
Weight: 1.00
SKU: RDDLZ-DPS-30

Available Options

Short Description

Measuring Range

Switch Ouput

Qty

Add to Cart

Buy Now Question?

Add to Wish List Compare this Product

Shipping & Returns

Create unlimited custom product blocks and display them in accordions or tabs or open blocks. Each block can be assigned to all products at once or specific products according to advanced criteria.

Additional Product Info

Create unlimited custom product blocks and display them in accordions or tabs or open blocks. Each block can be assigned to all products at once or specific products according to advanced criteria.

Factory price digital air pressure switch featuring withstand pressure 500kPa- 1.5MPa, ±1% F.S. high acuuracy. The pressure switch is widely used in factory automation, chemical textile industry, medical equipment, chemical industry and other fields.

Features

Numbers are displayed in 2 colors.
Space-saving installation.
Digital pressure switch can be copied to 10 pressure switches at the same time.

Specification

Model			RDDLZ-NZSE30A	RDDLZ-NZSE30AF	RDDLZ-NISE30A
Rated pressure range			0.0~101.0kPa	-100.0~100.0kPa	-100.0~1.000MPa
Display/ Set pressure range			10.0~105.0kPa	-105.0~105.0kPa	-105.0~1.050MPa
Withstand pressure			500kPa	500kPa	1.5MPa
Display/ Minimum unit setting			0.1kPa	0.1kPa	0.001MPa
Switch output		Output types	NPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs
		Maximum load current	80mA
		Maximum applied voltage	28 V (at NPN output)
		Residual voltage	1 V or less (with load current of 80 mA)
		Response time	2.5 ms or less (with anti-chattering function: 20, 100, 500, 1000, 2000 ms)
		Short circuit protection	Yes
Hysteresis		Hysteresis mode	Variable (0 or above)
		Window comparator mode
Analog output	Voltage output	Output voltage (Rated pressure range)	1~5V ± 2.5% F.S.		1~5V ± 2.5% F.S.
		Linearity	±1% F.S.
		Output impedence	Approx. 1kΩ
	Current output	Output voltage	4~20mA±2.5% F.S		2.4~20mA±2.5% F.S.
		Linearity	±1% F.S.
		Load impedance	Maximum load impedance: Power supply voltage 12V: 300Ω, Power supply voltage 24V: 600Ω Minimum load impedance: 50Ω
Environment		Enclosure	IP40
		Operating temperature range	Operating: –5 to 50°C, Stored: –10 to 60°C (No freezing or condensation)
		Operating humidity range	Operating and stored: 35 to 85% RH (No condensation)
		Withstand voltage	AC1000V for 1 minute between terminals and housing
		Insulation resisitance	50MΩ or more (500 VDC measured via megohmmeter) between terminals and housing
Fluid			Air, Non-corrosive gas, Non-flammable gas
Takeover diameter			Rc1/ 8
Power supply voltage			12 to 24 VDC ±10%, Ripple (p-p) 10% or less (With power supply polarity protection)
Current consumption			40 mA or less
Repeatability			±0.2% F.S.±1 digit
Display			4-digit, 7-segment, 2-color LCD (Red/Green)
Display accurancy			±2% F.S. ±1 digit (at 25°C ±3°C ambient temperature)
Indicator light			Lights up when output is turned ON. OUT1: Green; OUT2: Red
Lead wire with connector			±2% F.S. (at 25°C in an operating range of -5 to 50°C)
Temperature characteristics			±2% F.S. (25°C reference)
Lead wire			Oilproof heavy-duty vinyl cable, 3 cores ø3.5, 2 m 4 cores; Conductor area: 0.15 mm2 (AWG26); Insulator O.D.: 1.0 mm
Standards			CE, UL/ CSA, RoHS

Internal Circuits and Wiring

Dimension (mm)

Details

Tips: Digital Pressure Switch Working Principle.

The digital pressure switch is mainly used to detect the pressure of the relevant detection part. It works by sensing the pressure of the external environment through built-in sensors. When the external pressure value exceeds or falls below the safety critical point, the sensor membrane changes, and then a control signal is sent to guide the switch to change. Therefore, when the ambient pressure returns to normal and critical, the inner membrane of the sensor will move to the original position, making the switch reset automatically, and then detect the medium pressure signal through the special CPU modular signal processing technology.

Builder in Product TAB

NEW! Since Journal 3.2, the much improved T.A.B (Tabs Accordion Blocks) system supports the page builder inside the tab content. Unlimited Blocks, Tabs or Accordions with any HTML content or the builder interface (supporting custom rows/columns/modules) can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules. Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.